Akzo Nobel 2012 (www.akzonobel.com)

DME websites: All about DME http://www.biodme.eu/about-dme (as in 2012); DME forum in Japan http://www.dmeforum.jp/about/property_e.html (as in 2012).

Fagerlund, P. and Ramne, B. EffShip Project Summary and Conclusions. Report number EffShip WP9 01, 2013.

Fleisch, T., McCarthy, C., Basu, A., Udovich, C., Charbonneau, P., Slodowske, W., Mikkelsen, S-E., McCandless, J. (1995) A New Clean Diesel Technology: Demonstration of ULEV Emissions on a Navistar Diesel Engine Fueled with Dimethyl Ether. Society of Automotive Engineers, SAE Technical Paper 950061.

Green, C., Cockshutt, N. and King, L. (1990) Dimethyl ether as a methanol ignition improver: Substitution requirements and exhaust emission impact. Society of Automotive Engineers. SAE Technical Paper 902155.

Hara, T. et al. (2011) Study of DME diesel engine for low NOx and CO2 emission and development of DME trucks for commercial use. SAE Technical Paper 2011-01-1961.

IEA-AMF Task 14 “Investigation into the Feasibility of Dimethyl Ether as a Fuel in Diesel Engines”, 1997-1999.

IEA-AMF Task 20 “DME as an Automotive Fuel II”, 2000-2001.

Jung, D., Jeong, J., Lim, O. and Pyo, Y. (2011) Influence of pilot injection on combustion characteristics and emissions in a DI diesel engine fuelled with diesel and DME. SAE Technical Paper 2011-01-1958.
Kapus, P. and Ofner, H. (1995) Development of Fuel Injection Equipment and Combustion System for DI Diesels Operated on Dimethyl Ether, SAE Technical Paper 950062.

Kajitani, S., Chen, Z., Konno, M. and Rhee, K. (1997) Engine performance and exhaust characteristics of direct-injection diesel engine operated with DME. Society of Automotive Engineers. SAE Technical Paper 972973.

Karpuk, M, Wright, J., Dippo, J. and Jantzen, D. (1991) Dimethyl ether as an ignition enhancer for methanol-fueled diesel engines. Society of Automotive Engineers. SAE Technical Paper 912420.

Lim, O. et al. (2010) Research on the combustion and emission characteristics of the DME/Diesel Dual-Fuel engine. SAE Technical Paper 2010-32-0096.

Nylund, N.-O. and Koponen, K. (2012) Fuel and Technology Alternatives for Buses Overall Energy Efficiency and Emission Performance. VTT Technology 46. IEA-AMF Task 37. http://www.vtt.fi/inf/pdf/technology/2012/T46.pdf.

Oguma, M. Reconsideration of DME Fuel Specifications for Vehicles. IEA-AMF Task 47, December 2018, report, key messages. http://www.iea-amf.org/content/projects/annexes/47.

Semelsberger, T.A., Borup, R.L. and Greene H.L. (2006) Dimethyl ether (DME) as an alternative fuel. Journal of Power Sources 156 (2006) 497–511.

Sivebaek, I. M. (2001) End-Report of Task 20 of the IEA-AMF of the IEA: 'DME as an Automotive Fuel II', Part 2, DTU MEK-ET-ES 2001-04.

Zhang, G., et al. (2012) Study on strategies of anti-wear and leakage for fuel injection system of dimethyl ether (DME) engine. Society of Automotive Engineers. SAE Technical Paper 2012-32-0073.

Van der Ploeg, C.T.M. and Verbeek R.P. (2002) End-Report of Task 20 of the IEA-AMF of the IEA: 'DME as an Automotive Fuel II', Part 1. TNO report.

Vision Engineer (2004) (www.visionengineer.com)

Volvo (2009) Volvo in unique Bio-DME project, Press release, 18 September 2009.